T-WORKS Mini Piling Machine ZYC80BS-B1 Hydraulic Static Pile Driver For Building Construction
1, Description:Method of Jack-in Piling System
A modern technique by which pre-formed piles (e.g. Prestressed Spun
Piles, Precast RC Piles, H-Piles, Steel Pipe Piles) are
hydraulically jacked into the ground as displacement piles.
This mini piling Machine can drive the precast concrete pile from
150mm to 300mm for square pile, 200mm to 300mm for round pile. It
also can push the tube, triangle pile, H-pile, etc by changing its
jaws inside of the clamping box.
- Clay, soft soil, sand layer, etc.
- Noise regulated urban area.
- Vibration regulated areas
|paramete / type/model||ZYC80|
|Rated piling pressure(KN)||800|
|(m/min) Piling speed||Fast||4.5|
|Rise stroke (m)||1.25|
|(mm) Square pile||Max||300|
|(mm) Circle pile||Max||300|
|Side piling space(mm)||300|
|Corner piling space(mm)||500|
|Lifting pile's lengh(m)||8.0|
|Main dimension(m)||Work length||5.4|
4, Feature Advantage:
- An impact pile driver was traditionally used for side pilling and
corner pilling on pile foundation treatment at the site of city
reconstruction, close to river side or other obstacles. T-works ZYC
series pile driver innovatively have the clamping device for side
and corner pilling installed in one end of machine so that
structurally avoid using the same mechanism to treat with both side
pilling and corner pilling in minimum area
New pattern of hydraulic footstep type travel mechanism is composed
of two technical innovations of swing compensation and
auto-reposition device, extensively increasing the reliability of
components and maneuver ability of structure and is greatly labor
saving. With its impact structure the machine is easy to be
assembled and disassembled. Its biggest detached piece can be
loaded on a 40 OT trailer.